I’ve had a KGUARD Mars Home NVR Kit installed at my house for just over a year now, I bought it from eBuyer and paid a little more than I should have thinking it was a great investment and should last a good few year… it has been okay but unfortunatley the NVR side of it recently gave up the ghost.
The NVR initially started complaining about hard disk errors, randomly rebooted and is now just stuck on the boot up screen. Being familiar with embedded devices it ended up looking pretty bricked but unfortunatley there’s no obvious way to reflash the firmware. After a long email conversation with Danny Wu at KGUARD support, he wished me good luck at trying to reflash the firmware and has ignored me ever since, it would be okay but never actually told me how to get the box into recovery mode despite asking a fair few times… I’ll try fix the NVR at some point and if I have any joy I’ll write another post.
It’s not so bad right, you can still use the cameras?
In the meantime I installed iSpy connect – recommended by my friend Chris at work – on my home computer and thought that if I nipped out to Maplins and bought a slightly over priced TP Link PoE switch I could simply swap cables over and have some sort of CCTV system working in no time… was I wrong! Turns out the cameras aren’t 802.3af compliant so it won’t work without a little adjustment.
I didn’t want to go buy more kit without knowing the cameras would actually work, so I got an extension lead and a 12v 2A adapter trailing out the window at 2am, after a bit of tinkering I managed to get a stream from one of the cameras – annoyingly the cameras have their own static IP addresses which are own a different subnet to my home network and on reboot the settings revert back to default… adding a second IP to my network card sorted that.
The next day I nipped back to Maplins and got some PoE splitters, I popped into B&Q as well and got some IP rated junction boxes to cram everything into. After a bit of creativity the end result is that I can now use the KGUARD cameras but I have to have a slightly ugly looking box alongside them to shelter the PoE splitter, its not too bad but I’ve taken the opportunity to upgrade to some Trendnet TV-IP310PI’s and you can really tell the difference.
At least you won’t need to run new network cables?
Pah – Initially I wasn’t going to run new network cables as I thought the existing KGUARD ones would be good enough, unfortuantley not. When I went to put the new cameras waterproof connector in place I discovered that the existing KGUARD network cables only had 6 cores and just felt incredibly cheap, not wanting to take risks and to make things future proof I ended up spending the best part of a day feeding new cables through roof and under floors.
Where’s the happy ending?
It does come eventually, along the way I’ve ate a “cheddar and ham toasty”, got Chris up a ladder, learnt how to run and terminate my own network cables and recycled the KGUARD cameras to cover blind spots that weren’t covered before – those two both with the help of Chris one Saturday – and learnt that ultimatley you are always better building your own system as once you are past the year warranty neither the retailer nor manufacturer could care less!
I was torn between iSpy or BlueIris for software – I ended up going with iSpy which is opensource but should really be classed as freemium. If you want to do anything useful (playback footage, watch remotely or recieve email alerts) you have to upgrade to a premium version which is a monthly cost – not to worry though, I’m currently working on a VB program which will allow both live and pre-recoded playback of files possible and Chris is working on an alternative mobile ap.
I can’t thank KGUARD enough for this valuable learning experience and I would strongly recommend that if you are thinking about getting a KGUARD system then look elsewhere! If I hadn’t have had such good knowledge of network and computing then I’d have ended up with one very expensive set of paper weights.